Milwaukee M18 FUEL 12” Dual Bevel Compound Miter Saw EVERYTHING YOU NEED TO KNOW!
Milwaukee Miter Saw FAQ
A compound miter saw is a valuable tool that is made to cut crown molding, window casing, picture and door frames. It performs precise cuts, which brought the saw incredible popularity, moreover, the purpose of the tool can be defined briefly – trimming at certain angles. Compound miter saws are able to cut at different angles and tilt in one direction in order to cut a bevel.
This tool usually has a simple 90° degree angle lock/unlock mechanism. If you are a professional contractor, you can choose a 12” double bevel sliding compound miter saw, as this unit is large, powerful, and expensive. The 10” sliding compound miter saw is perceived as a decent model for typical home workshop usage. Almost each Milwaukee miter saw can be regarded as a decent option, for example, the M18 FUEL, which performs up to 400 cuts per charge and is able to last a whole day without recharging. The unit glides well for cutting without hooks and stainless steel was bench has 11 fixation points. It’s compact but leaves deep cuts up to 5 inches in a vertical position.
The tool’s usage isn’t hard; you just have to perform the following steps:
– Properly mark a board for further cut making.
– Perform the blade’s lining up with one side of the mark.
– Use delicate pieces as a backup.
– Don’t forget about stop blocks for repeat cuts performing.
– Take a jig for crown molding.
– Adjust the blade and take care of the tight fit.
– Make short and accurate cuts.
Secure the workpiece tightly. Lack of rigid workpiece fixation during sawing can cause damage to the tool and/or damage to the worker. Do not lift the saw blade while it is spinning, as the sawn-off piece, which can be on the opposite the blade’s side surface, may be discarded at high speed.