In order to remove the jammed part of the fastener from the object, it’s necessary to pick it up and unscrew it. Sometimes the fastener doesn’t withstand the load and breaks down, consequently, that part of it remains in the unscrewed object, while the second – in the hands, and if you leave everything as it is, it can lead to the equipment’s damage. Therefore, the solution is a convenient tool – the best screw extractor, with which you can easily remove the screw, bolts, and debris of heavily stuck studs.
If the attempts to manually unscrew wedged parts are vain, using an extractor has several undeniable advantages:
- The tool is very easy to exploit. You don’t need to have any particular repair skills.
- The screw extractor set includes different extractors of various sizes and diameters.
- There is no need to put a lot of effort to get the stuck element in furniture, equipment, or car.
- If you buy high-quality tools made of durable steel, the probability of the screw extractor tool breakage in the process of unscrewing will be minimized.
The device is able to fix the problem, appeared after the mismatching the screw’s head, putting too much power on the screwdriver, or maybe just attempting to drive a screw in at a wrong angle. Pay great attention to the following data because each screw extractor review contains only important information and is a helpful base for the right choice making. All these bolt extractor kits are very popular among users and some of them can become the substitution to different likeminded devices.
Best Screw Extractor Sets Reviews
IRWIN HANSON BOLT-GRIP: 5 Elements with Increased Durability
The screw extractor set contains five pieces for different bolt extractor sizes. The devices retrieve bolts and nuts without devastating any surrounding metal and keeping, for example, the engine’s threaded hole in safe. The case doesn’t hold the sockets securely and they rattle around, so the owner has to be careful with it. A high carbon steel construction provides each small screw extractor with long service life and increased durability.
- The instrument’s lobular design is suitable for different popular types of fasteners, so it’s easy to use units in various situations (to remove rusted, painted, or over-tightened elements).
- The transmission removal is not a simple process, and even MAPP gas heat/penetrating oil were useless, but a breaker bar with 1-foot extension revealed the bolt easily.
- The tools sometimes strip the teeth right off the sockets and round the bolt further, so it’s hard to call the units universal.
- The case is rather big for such a small set and takes much place.
VamPLIERS VT-001: Concave Shaped Long Jaws
These pliers have long jaws that can be handled using a rivet. Such a peculiarity makes it easy to place them in narrow spaces for gripping and manipulating bolts. Thus, the length can simply be increased or decreased, thanks to the possibility of adjustment. In most cases, elements are designed to firmly grip and turn hard-moving bolts and fittings. Classic pliers in such situations are useless. The model has concave shaped jaws. Thanks to the horizontal and vertical serrations, it’s possible to grab a screw or nut and withdrawal it.
- The device looks reliable and all the details are made in a high-quality way because of the thick steel. It seems that this craft tool can become potentially the best screw extractor for getting pass down over the generations.
- They grip well on non-hardened steel because the VamPLIERS VT-001 doesn’t slip, and holds tightly even such a strong material.
- The plastic handle looks like made of cheap plastic and has an unpleasant smell.
- The steel hardness is not enough for electro-mechanic works.
Irwin Tools Hanson 53227: 25 Elements with a Lifetime Guarantee
The set’s case is rather small (4.1 x 11.4 x 1.8 inches), so it isn’t hard to find the place for it at the garage or any other room. There is a thread on the cone-shaped working part, so the unit is not driven in but screwed into an object, which gives a reliable connection with the extractor.
- The heavy duty bolt extractor case is made of a reliable plastic and all 25 elements are kept in it seamlessly.
- The left-hand spiral design is made in an aggressive way, so this peculiarity helps an extra gripping power getting.
- The products have a lifetime guarantee, which means the decent quality of items.
- Its weight (4.05 pounds) is rather big, so it’s hard to move about with it.
- It’s easy to lose the smallest pieces and most of the time they are useless.
PANOVOS (8pcs): Universal Instruments with Water Pipe Extractors
The thread of most devices is clear, and the extractors are made of durable steel. They have passed the test for resistance to high loads. When the element from the set is properly used, it really quickly pulls out the bolts, even if they are significantly corroded. Naturally, as additional help, you need to use oil (to lubricate the bolt).
- The set contains elements of the various sizes, making the PANOVOS the versatile product.
- The devices can remove rusted, broken, or even stripped elements from different surfaces, without scratching it.
- Here you can find even two water pipe extractors, which were made especially for broken water pipes.
- One easy out bolt extractor doesn’t seem to be high-quality because the thread has some roughness.
- The plastic case is fragile due to the upper transparent part cracked very quickly.
Irwin Industrial Tools 53535: Compact Set of Spiral Flutes Devices
The tools are easy to use, but before the process itself, you have to make a really deep hole to allow the screw extractor grabbing. It’s better not to attach extractors to the drill because the screw retrieval is rather a slow process. Vice grip, apply abate pressure down and spin dilatory as an alternative. It’s hard to choose best bolt extractor among all the items the because each of them can be useful in different situations and is resistant even to aggressive chemicals.
- The correct usage makes no damage to the basic material or the tools in the process.
- The box itself has a small size (0.5 x 5 x 5.8 inches) and it’s easy to place it even on a small shelf, which requires only compact and lightweight objects.
- The spiral screw extractor has special flutes, which make it simple to dip into the metal without putting extraordinary forces.
- If you want to get the required result, you should have experience of using similar devices.
- One of five elements isn’t good enough because its tip first rounded and then broke off inside.
Alden 8440P: Extra Hardness and Ability to Center Itself
Each constituent component of the set can cope even with the painted over machine screws, which also were covered with the rust. After useless attempts to get rid of them (via drill and wrench), the Alden 8440P extractors help me remove some screws that appeared to be in a perfect condition and can be reused.
- Each unit from the set can be both two-step drill bit and extractor.
- The drill tip is able to center itself.
- Extra hardness helps deal with the old bolts and withstand the pressure.
- The manual doesn’t contain pictures, so it took me some time to find out what to do.
- I put too much pressure on extractor while removing a bolt from a motorcycle engine cover. It is broken now and all can do is to drill out the engine case.
ARES 70016: Small Device for Pneumatic or Hand-Guided Impact Wrenches
The extractor looks reliable because of the thick steel that is visible to the naked eye. It can’t work on a left-hand thread. It’s really great that even a galvanic reaction, which “welded” aluminum threaded nut and brass socket, can be smoothed out thanks to the ARES 70016. Of course, it’s possible only while being careful and without putting much pressure on the device.
- This unit is cross-functional because it can be used with pneumatic or hand-guided impact wrenches.
- Thanks to the hexagonal flat, the tool can work with the locking pliers and changeable sockets.
- It has small dimensions (7.5 x 4.5 x 1 inches), so is useful for working in uncomfortable conditions.
- The device is useless for actual tight or cross-threaded bolts because the tool just spins off around the bolt, instead of removing it.
- It doesn’t fit 6mm stud.
Extractor Usage: Basic Guide and Recommendations
With the help of this tool, you can simply hook the stuck item, and then unscrew it from there, but first, you need to know how to use a screw extractor. The process of twisting is reduced to the preliminary drilling of a small depression at the central part of the stuck element. After that, it needs to insert there an extractor of the required shape – conical or cylindrical, depending on the type of part that is stuck and broken in the object, and then part of this detail is quietly unscrewed. If the hole is larger than necessary, then due to the small thickness of the remaining wall and the use of the next size of the threaded extractor, the tool will jam and break.
You need to follow certain rules in order to unscrew stuck fasteners quick and efficient.
- If you have a desire to increase the extractor’s life, use cutting oil.
- It’s better to heat the jammed product slightly before using the extractor. Such a procedure will help remove the jammed screw or bolt easier.
- The use of reverse threaded drills greatly simplifies the process of unscrewing stuck debris.
- If the jammed part has a thread broken, then a six-sided key can unscrew it.
- It’s recommended to wear safety glasses while using a screw extractor. This is due to the fact that when working with metal, the extractor may be damaged or broken, and parts of the ripped apart tool will scatter in different directions and get into the eyes.
- If it’s impossible to pull out the broken element, you will have to re-do a hole of a larger diameter and cut the thread.
- Before starting operation, it is best to first grease the broken part with any lubricant, such as solvent or oil.
- A hammer and a core can slightly move the jammed part and then make it easier to pull it out.
A Broken Screw Removing Without an Extractor
If you are interested in how to remove a broken screw without an extractor, then check out the next pieces of advice.
- If the fracture point is above the surface and a part of the stud protrudes, then it needs to seize a piece of the rod (by welding) to a scrap of debris and use it as a lever.
- After placing the center punch or chisel an angle of 45 degrees to the surface, it starts the metal strikes with a hammer in the opposite direction of twisting.
- With the help of a hacksaw for metal or grinder with a thin cutting disc, you can cut 0.8 mm or 1 mm slot for a slotted screwdriver. If the break is below the surface, then several small holes should be drilled in a row. Aftermath, the sting of the old screwdriver is driven into this groove and scrolls.
- If all the options are useless, consider the hole drilling of a larger diameter with cutting a new thread.
The Screw is Stuck: What You Can Do About This?
Sometimes you may encounter a screw that doesn’t twist back. This is very annoying, especially if the screw is torn off, glued, or just stuck for no reason. Follow the guide to solve this problem.
- Make sure that you are performing the unscrewing in the right direction. In most cases, turning the screw clockwise will tighten it, and turning it counter-clockwise will release the screw.
- You should try various instruments. Use the correct size screwdriver. Most gadgets have ordinary screws, just very small ones. Sometimes the screws may be too big for the screw key you are using. Make sure the mentioned key fits into the slot in the screw head.
- Take a hammer and tap the bolt driver’s base. Such manipulation will help place the turn-screw into the head and create the conditions for further hammer’s setting down and removing the screw.
- Pay attention that such a method works only with soft-metal bolts.
- If the screw doesn’t loosen and the head is sticking out, you can try to use the pliers. Fix the protruding part of the screw, and then twist it.
- It’s better to use a socket wrench or vice to increase torque. This can help if your screwdriver has a hexagonal or square tip.