Top 7 Best Hammer Drills reviews

Top 7 Best Hammer Drills reviews
5/52 ratings

A hammer drill machine drill is a great tool for used chiefly for drilling in hard materials. It is a sort of rotational drill with an effect that creates a pounding movement. The best hammer drill works much faster than a regular concrete or brick drill. They are increasingly powered by cordless technology.

Hammer drills are more expensive and bulkier than regular drills. They are, however, used to drill concrete blocks or wood studs. For instance, an electrician mounting an electrical box to a wall would have the option to use the same hammer drill to drill into either wood studs or masonry walls.

All in all, what really makes this mallet drill stand apart from the rest? Alterations have been made to it that empower the client to make use of it to the most extreme. Also, it is practically on the moderate side as contrasted with its partners. Maybe, the main drawback to hammer drills is that the battery and charger come independently.

Hammer Drill Reviews

DEWALT DW511 Hammer Drill, 1/2-Inch, 7.8-Amp

DEWALT DW511 Hammer Drill, 1/2-Inch, 7.8-Amp
For a reasonably priced hammer drill, this held up nice. When it comes to a hammer drill, the DeWalt DW511 is certainly one of my preferred brands. Their models are outstanding for dependability and productivity. The drill is a ½ inch tool with a 7.8 Amp motor, it weighs 5.3 pounds and it is powered by a corded electric.

Although this hammer drill has been around for quite a while, it remains a good option for the daily tasks around the home. It features a powerful 7.8-Amp engine that delivers a maximum speed of 2700 RPM and can be controlled via the two-finger button. It is a lightweight model that all the users who experience cramps from extended drilling sessions are certain to enjoy.

Besides, this has a side handle that provides better balance and control (included in the bag), as well as a depth rod and a chuck-key (included with holder).

Pros

  • It is a high-performance hammer drill.
  • Great for external use because of the cord length.
  • It copes with chuck loosening, or anything, for similar purpose.
  • It features built-in stop.

Cons

  • It has no carrying case.
  • It requires a toothed key to tighten and loosen the jaws.
  • Under severe load, it gets too hot. There is a possibility that it will catch fire some day.

Bosch 11264EVS 1-5/8 SDS-Max Combination Hammer

Bosch 11264EVS 1-5/8 SDS-Max Combination Hammer
I must say that the Bosch hammer drill works well at tearing out tiles and drilling into hard surfaces. It is a ⅕-inch tool with a 13.0-Amp motor and has a dual-mode selector. Its features include a double mode selector for blend flexibility – rotating sledge or hammer mode. Giving 6.5 Ft.- Lbs of effect vitality, the instrument weighs just 15.2 lbs, for a top execution to-weight proportion. The Bosch 11264EVS has a vital grip that limits torque response. Potential buyers will value the fact that it’s used for both drilling and chiseling. There are 12-position Vario-Lock streamlines etching points. Bosch’s Vibration Control in the sledge system and grasp zone give improved user comfort. What’s more, with constant response hardware, you’re advantaged by smooth beginnings and removed consistent burdens.

Pros

  • It has an integral clutch that helps minimize twisting force reaction.
  • It provides a constant response circuit that enables a soft-start and maintains constant speed under load.
  • It works well to dig hardpan, drill concrete, and break concrete.

Cons

  • It has very low drilling power when compared to the pricey options.
  • The trigger continuously slips out of grip.

Makita XPH12R 18V Cordless 1/2″ Hammer Driver-Drill

Makita XPH12R 18V Cordless 1/2″ Hammer Driver-Drill
This tool is only useful as a hammer drill. The Makita hammer drill weighs 3.5 pounds. It is battery powered and the product dimension is 5.5 x 15.8 x 13.2 inches. The XPH12R Max Torque with a productive brushless engine that conveys up half more work per charge, expanded power and speed, and longer instrument life.

For the expert user, this implies all the more penetrating and driving force, more noteworthy profitability, and less entangled and down the platform or stepping stool to get to the battery charger. In driver mode, the customizable torque settings give more control to a full scope of uses, from enormous clasp to littler and sensitive screws. For boring into brickwork, just change to the percussive sledge driver-drill setting.

Pros

  • It has a three-mode operation includes “Rotation Only,” “Hammering with Rotation,” and “Hammering Only” for multiple applications.
  • It possesses a one-touch sliding chuck for easy bit changes.

Cons

  • It may have issues with the chuck key.
  • Drill body is made of plastic, causing it to feel flimsy.
  • No LED light (which is present on the Makita HP2050F).

SKIL 6445-04 7.0 Amp 1/2 In. Hammer Drill

SKIL 6445-04 7.0 Amp 1/2 In. Hammer Drill
It features a half-inch heavyweight chuck and 7.0 Amp motor power. The side handle is large giving maximum comfort to the user. The device has a variable speed trigger, a maximum 3000 RPM and one year warranty.

Additionally, it comes with a foregrip that appears to be robust. This helps in providing a solid grip for the handler. The cord is about 10 ft long, so, it’s enough for external use. The body of the drill is covered by 75% of rubber and 25% of polyester plastic. Only the drilling tip is cast in a metal finish.

Reasonably priced with a lot of great features, the SKIL 6445-04 surely merits a place among top-rated hammer drills.

Pros

  • A two-finger trigger allows users to control speed.
  • Accepts oversize beats.
  • For casual use, it’s an affordable alternative so high and models.
  • Lightweights with 18V of power and economic build.
  • Easy to use.
  • Brushless motor provides a reasonable battery life.
  • It has an LED light.

Cons

  • Location of key chucks may present hazard.
  • Additional drill bits are not included.
  • It doesn’t come with a battery.
  • May occasionally lock in hammer mode.

DEWALT DCD996P2 20V MAX XR Hammer Drill Kit, Brushless

DEWALT DCD996P2 20V MAX XR Hammer Drill Kit, Brushless
The DeWalt hammer drill is a really decent model on my list! This hammer drill comes equipped with a heavy-duty nitro-carburized metal chuck. The great thing here is that the engine is 38, 500 BPM. When compared to other drills, the DeWalt offered a much higher drilling power.

It uses a torque of 820 UWO whereas the older model had just 650 UWO. The drill speed of this tool ranges between 3 levels. They are 0 to 400 RPM, 0 to 1300 RPM and 0 to 2000 RPM. The DCD996P2 has a heavy-duty ½–inch ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. This means that the entire instrument remains as durable as you’d expect.

The carbide inserts can be set from 1 (light duty) to 11 and finally, ‘T’ for heavy-duty work.
They likewise offer a superior bit gripping strength and a high-efficiency.

The XR Li-particle batteries measure a 33 percent higher limit than the standard packs. The 3-mode LED light gives illumination in dim or tight spaces and is up to 20X more splendid than the previous model. And that’s because previous versions had a 20-minute shut-off LED light.

The A3 all-metal transmission with maximum range height optimizes the quick application speed and improved run-time of the device, with 0-38,250 RPM for quick penetration of brickwork materials.

Pros

  • This model comes with a 3-year warranty, 1-year free service and a 90-day money guarantee.
  • It has two led lithium batteries for reliability and long term use.
  • It can be used in confined spaces because the design is compact.

Cons

  • It makes drilling noise after shutdown.
  • The chuck is not as tight as other products by DeWalt.
  • The lithium batteries’ size is not fit for this model.

Milwaukee 2607-20 1/2 Inch 1,800 RPM 18V Lithium Hammer Drill

Milwaukee 2607-20 1/2 Inch 1,800 RPM 18V Lithium Hammer Drill
Milwaukee has produced another powerful tool for intensive construction projects. It is a cordless hammer drill that is both lightweight and powerful. Take on extreme errands with this Milwaukee 2607-20 if you wish to drive into very hard areas like concrete walls. It’s equipped with a 4-post frameless engine that conveys a noteworthy 525 in.- lbs. of torque and an all-metal ½-inch single chuck that gives the most extreme sturdiness and maintenance. Portable and ergonomically built, it’s under 8 inches long.

Pros

  • It has a Redlink Intelligence system that provides optimized performance and overload protection. This system provides total system communication between tool, battery, and charger.
  • It is easy to use.

Cons

  • The charger and battery are sold separately.
  • It is heavy.

Ryobi P214 One+ 18 Volt Lithium Ion 1/2 Inch Hammer Drill

Ryobi P214 One+ 18 Volt Lithium Ion 1/2 Inch Hammer Drill
The Ryobi P214 may be the best drill for concrete walls, but it has come issues. It’s also used for drilling holes in wood, plastic, and metal. The Ryobi P214 is made of plastic, weighing 3.95 pounds. The RYOBI 18V cordless hammer drill includes a variable 2-speed transmission for adaptability and conveys up to 1,600 RPM and 2,400 RPM for heavy-duty tasks. Its 24-position grip handles high-torque applications and permits speed mode changes. The grip zone improves client comfort.

The Drill is sold with a warranty. You also don’t have to pay extra cash for batteries or chargers as they come bundled. An important part is that this hammer drill works with any 18V battery. If you value a tool with light weight, then go for lithium batteries in order to have better execution.

Pros

  • Even though this is a cordless tool, it has great torque.
  • I like that you can buy it without the battery if you already have one.
  • It has a bright light that shines up at the drill work.

Cons

  • It comes with a single screwdriver bit, which is a bit too short for minor work.
  • The hammer function is not a stand-alone feature so you cannot install a chisel bit and hammer alone.

Buyer’s Guide

Important Things to Know About Hammer Drills

So what is a hammer drill?

The hammer drill, otherwise called a percussion or impact drill, is prevalent because of its capacity to bore holes on very hard surfaces. Technically speaking, any drill that uses a hammer mechanical motion to bore a hole is viewed as a hammer drill.

These drills are regularly utilized when extreme force is required.

Initially, China’s primary boring strategy was designed during the Han line. The procedure included two to six men hopping on a level at intervals. The reason was to raise a substantial iron piece joined to long bamboo links. By using mostly cast iron bits and instruments developed of bamboo, the early Chinese were able to penetrate depths that were as much 3,000 ft. (910 m). The development of percussion boring machines took more than a few years to accomplish.

The starting point of the primary sledge drill broke out a dispute among the communities. At the time, German organization Fein licensed a Bohrmaschine Mit Elektro-Pneumatischem Schlagwerk ( which means to drill with an electro-pneumatic striking system”) in 1914. Until then, the German-owned company Bosch delivered the first-ever “Bosch-Hammer” around 1932 in large scale manufacturing.

What is a Hammer Drill Used for?

Hammer drills are good tools to drill holes in the material that might be difficult to work with when using less powerful tools. Regardless of whether you have to tear apart ceramic tiles or boreholes in concrete, a high-quality hammer drill won’t disappoint. You can use this tool to drill holes in hard materials so that you can embed screws, bolts, and even little fittings. A hammer drill is also great for light brickwork.

The main point is that you don’t need to spend huge amounts of money on a hammer drill. But more often than not, expensive drills are normally equipped with superior carbide tips, and the tips are more safely attached to the shank, which in turn lessens breakage in their use.

How to Use Hammer Drills?

At the stage where you need to drill holes through solid surfaces, a hammer drill will be a helpful tool for the job. Push and draw movements along with the drill and impact are the main highlights that render a drilling hammer successful in breaking through very hard materials quickly. Below are the steps on how to use a hammer drill.

Step 1 – Get the Right Measurement: Get the size for the bit to be used for the ideal estimation of the hole. In the event that you will drill a big hole, you might need to bore a pilot hole to keep up the precision of the bit without bowing into the material.

Step 2 – Pick the Right Bit: Pick the correct piece for the material you will be drilling. Likewise, consider the sharpness of the bits and use carbide for an extra tougher tip.

Step 3 – Attach the Bit: Put the bit into the hammer, ensuring the tightness of the attachment. Use a chuck to tighten it.

Step 4 – Mark the Drill Bit or Set up the Depth Stop: Measure the depth of the hole. If your hammer drill features a depth stopper, set it up to the ideal depth. However, if your hammer drill does not have that feature, simply wrap the bit using concealing tape to check the depth that you want to drill.

Step 5 – Plug It Up: Search for the secure and nearest outlet to your project to dispose of the use of an extension cord. However, if you need one, ensure that you use a heavy-duty cord for this type of power tool. Plug it up and then turn it to a hammer setting. Make sure that you have protective goggles, ear protectors, and safety gloves ready. Wear them before starting to drill.

Step 6 – Point It Out: Place the tip of the bit on the preferred area. You need to make sure that you are decisively pointing at the correct spot. Pull the trigger and then start drilling. You don’t need to apply a lot of pressure on the drill. Simply put light pressure on the drill as it does its job.

Step 7 – Blow It Away: From time to time, you will need to blow away the residue and bits of rocks from the hole. When you are done drilling, just change the switch to the reverse setting to pull the bit out of the hole. There are times when a drill does not work as you intended, like when you hit a significantly tough material. At the point when this happens, you should simply place a concrete nail into the hole and start pounding. This method will help you break that tough material and afterward you can go back to using the hammer drill.

How do Hammer Drills Work?

To better address this question “how does a hammer drill work”, we’ll use a simple explanation. To begin with, the hammer drill gets its name from making a sledge-like movement when being used. It’s quick and tedious “pounding” of against solid or stone or brick causes the device to make holes in these super hard surfaces.

For a clearer picture of how it works, imagine someone breaking down a compartment with the sledge while you’re burrowing through in order to get to the end of its thickness. This is what happens when a drill is mounted. The difference is that in this case, the strikes are quick and heavier. This kind of device is extremely loud and sounds like a jackhammer when you’re holding it. That said, In the event that you utilize a drill on a hard surface, you would find that it doesn’t have all the ability to penetrate the hole by itself. So, you may have to add some force and even control the movement sometimes. The best hammer drill on the flip side is different from other drills because it does not rotate. It simply works by chiseling away concrete, stone, cement, or brick until they’ve made a hole large enough for a screw to fit into.