Stud Finder is a miniature device used by builders and people engaged in D.I.Y to find the same place where the beam is, or how it is called a “stud”, behind the wall of drywall. The best stud finder is a universal device for detecting live wires, metals and wooden support beams, for example, in concrete, gypsum walls and ceilings. Detects and allows you to localize the position of hydraulic water pipes, rods of reinforcement, electrical wiring. Use a stud-finder to find wooden battens/studs and to ensure there are no hidden pipes or wires behind where you intend to drill.
Quick overview of the most popular stud finder in 2019
We analyzed all stud detectors and provided full function information. Each stud finder must find its buyer. Detectors at a lower price do not have the functions of fast and accurate search, but at their cost, they justify their purchase. If you need a device with a larger set of features, look at more expensive models.
If you want a dependable product for accomplishing that task, something that should last a good long time and which won’t frustrate you with false positives, then the Franklin Sensors ProSensor 710 is your tool. For the first purchase, it will be a perfect solution. Designed with the professional contractor in mind, the 710 is our most accurate and deepest sensing stud finder.
If you are experienced stud finder user but want a new one, definitely choose DEWALT DCT419S1. Although there are a lot of stud sensors on the market, the DEWALT 12-Volt Handheld Wall Scanner lets you find more. You will never be disappointed in this stud finder.
If you are looking for stud finder for plastic surface and don’t want to pay more money for some “benefits”, choose reliable universal detector Bosch GMS 120 with three modes of operation that quickly and accurately detect objects,the contents of non-ferrous and ferrous metals,electrical wiring, wooden beams.
If you are looking for stud finder for metallic surface and you cannot decide which one is better for such type of work choose The MetalliScanner M 40. It solves complex problems of finding structures in plastered walls by identifying nails with which the wooden cover is attached to the structure.
If you are looking for best magnetic stud finder choose CH Hanson 03040 — the best magnetic stud finder. CH Hanson 03040 Magnetic Stud Finder Click Thumbnails to Enlarge Positively locates nails and screws with powerful “neodymium” magnets.
If you want to buy the stud finder and never regret about such purchase, definitely choose — Zircon StudSensor e50-FFP — the best stud finder for its money. Zircon has wrapped up their proven, patented technology into a revolutionary new form.
Check buyers reviews to find the best stud finder in 2019
We will carry out a more detailed reviews of various Stud finders for each buyer. The situation on the device market is constantly changing. It’s enough for a large manufacturer of detectors to launch a new model on the market, as all buyers are immediately beginning to show interest in it.
Quality of detector determines how long the buyer’s interest in this model of the detector will last. New search detector models are changing old, and this process is ongoing. What is the best stud finder? Let’s talk about these best stud finders.
#1 Franklin Sensors ProSensor 710 – the best overall stud finder in 2019
The advanced technology of Multisense Technology is defined simultaneously.
Bright LED lights light up to indicate the location of the hidden objects, which makes it easy to visualize the position of the thorns.
Define the width of the hidden objects in the wall so that you can know the location of the hidden objects, but also see their size. Like other wall scanners, it does its job well. Stud sensor performs a fast search of the desired object. This is a professional drywall stud finder for customers who have a fairly large budget and want advanced features and search capabilities from the detector.
- Advanced technology Multi-Sense technology
- Definition of the width of hidden parts
- Constant activation of deep scanning
- It detects studs very efficiently
- Can find a double stud and identify a single stud as well
- A fairly high price
- Sometimes a problem appears in the microswitch
#2 Zircon StudSensor e50-FFP — the best stud finder for its money
The StudSensor e50-FFP Corkscrew finds the edge of the wood, metal studs and beams behind walls, ceilings or floors. An easy-to-read display shows the sides of the corners. The pointer identifies the target, and the detection does not take much time. The patented design and contour form provides a light, reliable clamp in any hand and at any angle. This is a wire / tube detector and a studio detector for finding targets.
- Easy-to-read LCD display indicates stud edges updated spotlight POINTER that shines as an arrow-shaped light on the wall to mark the target
- Wire warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep
- Zircon patented “over-the-stud” indicator alerts the user to start the scan in a new location
- Patented truncal technology indicates when the tool is calibrated and ready to scan. The sensor E50 is a higher-end edge-finding tool, striking the right balance of affordability and features for casual users
- A high price
- Sometimes the search is impossible in the concrete walls
- Batteries are absent in a kit
#3 DEWALT DCT419S1 — the best premium choice
Patented technologies allow you to identify five classes of built-in materials (wood, ferrous metals, non-ferrous metals, plastic and uncovered electrical wires that are behind the back wall up to 3 inches deep, glass surfaces, including drywall, plywood, concrete and ceramic tiles. A 3.5 “display helps view better between the type of built-in material and the location tracking panel shows the location of the materials in the entire area. Best wood stud finder detector is correctly looking for tree targets.
- The detection technology searches for 5 classes of embedded materials over the wall surface areas
- Scanner analyzes many different types of wall surfaces
- Processing of embedded materials at the same time using the automatic display function
- 3.5-inch LCD display
- The tracking bar displays the location of the material in the entire visible area
- Sometimes does not show wiring in a concrete wall
#4 The Bosch GMS120 — the best stud finder for the plastic surface
This is one of the most versatile detectors. It is ideal for searching metal structures, wiring, or wooden elements.
With automatic calibration, you can detect any hidden objects and avoid mistakes to a depth of 12 cm. This was also possible thanks to the 3-colored light ring. The detector also contains a precise indication of the center of the object using the Center-Finder scale.
Better visibility of the search result thanks to the backlit display.
The detector contains three modes for detecting objects: hard processing mode, metal processing mode, current conductor cable modem.
- Maximum depth of detection — 120 mm
- Maximum depth of copper detection — 80 mm
- Maximum depth of detection of conductive wiring — 110 V/230 V: 50 mm
- Maximum depth of detection of wooden structures — 38 mm
- Automatic calibration
- Automatic switch-off: 5 min
- The weight 0.27 kg
- Not very comfortable in the hand
- Probability and reliability are not up to par. Interference is on the radio channel, email
#5 The MetalliScanner M 40 — the best stud finder for metals surface
Quickly and easily detects metal in trees, drywall, panels, tiles, plaster, concrete and other nonmetallic surfaces. The detector finds a black (magnetic) metal, up to 4 inches, (10 cm) and a colored (nonmagnetic) metal with a depth of up to 2 inches (5 cm).
The M 40 solves the problem of detecting pins in slats and gypsum walls that do not contain a metal mesh, by detecting a pattern of nails that attach a wooden bar to the stud. The MetalliScanner M 40 is great for scanning recovered lumber for hidden metal.
The wooden frame found under a putty about 1-1.5 cm. Impresses a sensitive sensor. A big plus is the backlight of the screen. Our team hasn’t found any cons, you just need to learn how to use it.
The M 40 has two positions for scanning, each position has a progressive LED display. When it gradually approaches a metal object, red LED is gradually highlighted from below and up. The top coil and the sound signal indicate when there is a metal target.
- It is able to find black and non-ferrous metals on most non-metallic surfaces
- LED coils indicate the signal strength
- A blue coil and a beep signal point to a metal target
- Scan positions: the location of small objects, including screws and nails
- Wide, advanced scanning detects metal in walls or in concrete
- Ideally suitable for layer and plaster walls without metal mesh
- A high price
#6 CH Hanson 03040 — the best magnetic stud finder
Magnetic studs are a rather old seeker compared to modern, more advanced seekers. Despite its simplicity, an excellent magnetic finder can be a great budget or extra option if you want an explorer that will work without any battery. Using a built-in magnet, hairpin seekers such as the CH Hanson 03040 naturally will give you a good idea of where the studs are behind the wall. This is one of the top-rated stud finders.
- Easy to use
- No need to use batteries
- A convenient clamp
- Impossibility to work on walls with brick coatings
#7 The Stanley FMHT77407 — the best user-friendly LCD stud sensor display
The audible signals and sequential LEDs of the detector point to the object, the marking channel identifies the purpose while searching, and marks the surface where the object was detected. The stud finder contains an accessible and user-friendly backlit LCD for displaying the sensor, which will be understood under low-light conditions. The device can detect alternating current, wood and metal to the depth, also there is a function of deep metal scanning. The detector contains “One Pass center-find” technology that allows you to search and locate connection centers. Also, the detector is an auto-calibration device.
- Search and detection of alternating current
- Finding wood and metal up to 1/2 inches’ deep
- Searching and scanning of deep metal
- The presence of “One Pass center-find” technology, which allows finding connection centers
- Illumination screen, to see the center of the hairpin
- Detect wooden, as well as metal studs up to 38 mm
- Auto calibration
- Mark the channel for the center of the pin
- The sound signal indicating the center of the pins and live AC power wires (+ drive)
- Does not show the presence of wiring in the brick wall (under the plaster) at a depth of 50 mm, even with the load connected (heater)
- Battery is not included in a kit
#8 Zircon StudSensor e50-FFP — the best stud finder for wooden surface
This is a multi-functional advanced Zircon MultiScanner 740 for wood and metal pins and beams behind walls, floors, and ceilings. The 4-Mode switch makes it easy to change Scan, Metal Scan and Live AC Scan modes. The MS 740 includes an integrated marker that makes it easy to tag your target.
- Stud Scan mode finds the center, edges, and direction of the wood or metal studs or beams up to 3/4 inch
- High-sensitivity mode doubles the scan depth
- The Metal Scan mode allows you to find a non-ferrous metal: a copper tube, black metal, such as fittings, up to 3 inches
- AC Scan finds an electric wire up to 2 inches
- It contains an ultra-bright easy to use display for ease of use
- The signal strength indicator helps distinguish between shallow and deep goals
- Auto-Correction Technology automatically corrects standard errors, such as the start of scanning through the studs
- The impossibility of searching for copper wires
#9 Pro Finder 5000+ — the best cheap stud finder
The technology of the deep detection has a larger area of the touch panel, allowing more in-depth scan, instantly point to the location of the pins, 13 precision sensors of stud finder provide individual scanning, that are fast and easy.
ProFinder 5000 is much less vulnerable to the various inequalities that may occur in construction, so it can simultaneously see the wall in several places. This detector can be categorized as the best cheap stud finder. He applies the readings from several points that are on the wall to determine what is behind the wall. The ProFinder 5000 creates wall-based images based on many indicators, so one of the reasons for buying ProFinder 5000 is that it is the most accurate digital stud finder on the market.
ProFinder 5000+ detector allows you to accurately and quickly determine and locate the location of the conductors of AC electric current, various metal objects, such as nails, pins, spacers and other fasteners. The detector has a digital unit with automatic tuning for detectable material, the display itself is easy to use.
- Less vulnerable to various irregularities
- The ability to simultaneously detect and search multiple objects
- Ability to instantly identify objects, click the button, and you will see the location of any hidden objects at the same time. ProFinder 5000+ instantly searches the wall without moving, and immediately displays the location of any hidden objects
- Deep Scan. The ProFinder 5000+ has the best performance of any spider seeker, as it searches on thick surfaces and has the best depth scanning capabilities of any other spider seeker
- Ability to determine a width. The ProFinder 5000 is an ideal detector for checking the width of hidden objects. The ProFinder 5000 determines the width, the user only needs to notice the the size of the LED light to know the width of the object behind the wall
- Pretty high price
Buyers Guide – What you need to Know about Stud Finders
The section below will provide answers to most of the commonly asked questions. Find quick answers to common issues, which set up to present all information about stud finders. Check it out!
What Should I Look for in a Stud Finder?
The main criteria for you to purchase the best searcher are the price you need and the set of necessary functions.
A minimum function for most users is the presence of an ultrasound search that can easily detect live wires. If live wiring is not required for work, such a magnetic detector is acceptable for purchase, but one should consider the following:
- What materials, which search surface are planned to use?
- Are there live wires on this surface?
- Are there pipes in this area?
- Is there a risk of damage to metal reinforcements during the cutting of this area?
Virtually any electronic stud finder can easily find electrical wiring.
For most users, the detector’s ability to detect non-ferrous metals is a big bonus but this is due to the possibility of detecting copper pipes, which are plumbing at home.
For the most part, a cheap detector will work fine and it will find the goals you need but it may take several times more to detect the required objects than the advanced and expensive versions of the detector.
The choice depends on you.
Criteria for Evaluation?
Analysis of these detectors is based on several key criteria, namely, relevancy – the degree of matching of the result from the desired and to the real, the efficiency – how much the detector performs its work effectively, its price, functions, and capabilities of the detector.
The rating of the detectors is summed using a numeric scale.
- Price – Each device has its own price. Each user chooses the device according to the price and functions. There are detectors at low prices, but they have limited search functions. High-end tools provide the user with more advanced features and capabilities to search for pins.
- Efficiency – Efficiency for each is determined by its own. In our case, the efficiency of the detector is the detection speed and additional features offered by the buyer.
- Relevance – It often happens that the buyer after the purchase is dissatisfied with the work of the device. To avoid this, we recommend you to familiarize yourself with all the features and capabilities of the detector to be satisfied with its work.
- Validity – More expensive devices have a longer lifespan, but one must also take into account such a factor as operation, depending on how often the detector is used, so that will last longer.
How much does a stud finder cost?
There are budget versions of the stud finder and they are great options to save your money. However, one has to be very careful because there are many options that, for a small budget, which is spent on the purchase, the stud finder lacks the precision needed for a reliable search within the walls. Typically, the best options for a cheap budget offer the foundations of the ping search, with no additional detection capabilities. Zircon StudSensor e50-FFP will give you the necessary ability to detect wood and metal at an affordable price.
Why Do I Need a Live Wire Detector?
By testing for the presence of live wire for many years, it was the use of various tools that provided direct contact between the live wire and searching tools, and this is unlikely to change in the near future. The main search tool is the light emitter that has been used for many years to detect existing live wires inside the pipeline, which, by applying neon lamps, so-called LEDs, use the discrete component and the antenna in the electromagnetic field of the conductive wire and amplifies it and shows it as a light indicator. Credible and practical results show a significant degree of accuracy and reliability of the search. Also, such device is user-friendly because direct contact with a live wire is not possible.
How Do You Choose a Stud Finder That’s Right for You?
Everyone knows how difficult it is sometimes to search for something in the “wall”.
To get a clear and 100% result of exactly where the pin is, you have to dig into tons of garbage from forums, where people are advised how to look for a pin without a stud finder.
Sometimes you have to spend for it not minutes, but hours of your priceless life.
Therefore, you need to think carefully and find the right detector for you, which will quickly carry out the required work and will contain all the necessary search functions for you. This detector is easy to use and works great.
How often will you be using it?
Unfortunately, not all detectors are ideal. Erroneous impressions of existing pins are common, there are also moments where detectors cannot penetrate the wall surface so sufficiently to define the frame inside precisely. If the pin detector says that the stud is available, it is best to test this place with a stud finder, to accurately verify if there is a pin.
While looking for pins on the surface, control your time and experiment with one or more of these methods. It may be a bit like playing a game in a hideout but the placement of a stud or ceiling is an important and necessary step in the proper installation of a TV or any other wall or ceiling mount.
Is it for professional or home DIY use?
When you are considering a project to improve your living conditions, it’s important to know what work you are able to do what kind of work it’s best to leave for professionals. Some work moments can be quite simple so that you, as a simple average homeowner successfully can solve them. Other works clearly require the qualification of the worker. This is a rather delicate moment between the two extremes that can be complex.
Lowering the value of DIY may seem attractive, but if your skills are not professional, and they are frankly amateurish, the result will not affect potential buyers. Incorrect work can be dangerous for buyers and expensive for your future reputation.
“There is nothing more for the buyer than to see a job that was done professionally,” says Jim Smith. On this, you can determine. If you have professional skills, it is obvious that the purchase of the stud finder will be carried out for professional purposes, but such things as changing lights, installing sockets, replacing the sink, mixer and also finding the pins in the wall that do not require professional skills and can be labeled as DIY.
What is your budget?
Searchers with a cheap budget for a small amount of money have many useful features within their low price tag. You can detect both wooden and metal studs, the icon blinks and sends a beep when it finds the desired target.
The budget versions typically include two scan modes: StudScan for pins — up to 0.75 “depth and DeepScan for targets — around 1.5” deep. You can also detect alternating current to avoid dangerous electrical hazards.
What does a stud finder do?
Well, it’s quite simple. Materials such as wood are reasonably bad electrical conductors. They are e-insulators, they do not spend electricity at all.
The corkscrew is a battery-operated electromagnet and is designed to determine the location of vertical wall tapes, called spikes. LEDs reflect a change in the electromagnetic field to signal the proximity of the detector to the pin.
The electromagnetic field also searches for the location of metal nails, which attaches the drywall to the hairpin. To search for the pins, install the device on the wall and turn it on, usually holding the side keys. Slide the detector horizontally on the wall until the light shines on the hairpin and mark this dot with a pencil or other instrument. Other spikes will be located 16 or 24 inches from this place.
Stud-finders work on batteries. Make sure your battery is working on your detector and the front of the device is clean.
Why do you need to use a stud finder?
The technology of manufacturing drywall is a plaster that can regulate the air humidity in the room due to its porous structure.
Gypsum cardboard has been used in construction for a long time — it is quite simple at work, convenient and important inexpensive and practical material for the manufacture of walls (partitions) of their alignment (for example, for preliminary preparation of the wall to the laying of tiles).
Gypsum board is also widely used for the development of multi-level ceilings. The profile for such drywall guides, ceiling PN 100 × 40, which is carried out and performed when installing the false ceiling frame, as well as for wall cladding. When connecting a false ceiling frame, the PN-profile is fixed primarily on the perimeter of the room. In case of installation of the frame of the facing, the profile is fixed to the ceiling and to the floor. The profile of the ceiling guides is made by using the method of cold rolling of galvanized metal tape, which is 0.5 mm thick.
Stud finder reviews give the user an idea of all available detectors on the market. Each studfinder can be the best one, according to different criteria, because each buyer has his budget, which he/she is ready to spend on the purchase, and everyone needs a set of functions to be performed by the device.
What are the Different Types of Stud Finders?
There are different models of detectors. Let’s examine each of them in more detail.
There are at least three different types of stud finders; if you do not understand how they work, we will try to sort it out.
Magnetic – they do not perceive stud themselves (unless you are not in the office building, for which the steel studs are used!. The magnet in such detector is not very strong; it may be necessary to search the wall many times to find a nail.
Metal detectors – their concept of work is the same as in the magnetic type – they do not perceive the stud, the electromagnet in the detector induces current electric conductors in the neighboring and finds the most sensitive received magnetic field.
Ultrasound — the only type of detector that directly detects hairpins by sensing changes in the density of the area itself.
After detecting the pins, the detector sounds a beep (or flashing) to indicate that the target is detected.
About metal studs
The searcher uses powerful magnets to find metal studs and fasteners. The base of the search appliance also includes a double-sided level, so you can hang a metal pin finder to precisely align walls and other surfaces. At the bottom there is a pointing arrow that allows you to mark conveniently the safe place for screws and nails, eliminating the need for trial and false treatment on the walls.
Metal studs are taught to look for, especially for inexperienced workers. The pins are screwed in one place, they are not nailed, and if two studs are accidentally or intentionally located too far apart, it is easy to unscrew the pin and move it. This is not a job with wooden spikes, which will be weakened by an attempt to remove nails.
Since the steel has a fairly high thermal conductivity, the use of metal studs for the treatment of exterior walls can in some cases transmit the cold to the room. To avoid this phenomenon, it is necessary to use rigid foam insulation on the outer walls.
Metal studs can be very sharp, so while working, it is better to wear protective gloves.
In individual cases, metal studs can be more expensive than wooden studs but they are easier to work with and, as a rule, they reduce labor costs.
How does stud finder work?
Stud finders are small devices that are used to locate a beam that passes through drywall.
They are incredibly useful, there are many models on the Internet, each buyer can pick up the device he needs with the required characteristics at affordable prices.
They are portable devices that are used to determine the place where the material is denser by a device.
The wooden beam, of course, is denser than weak drywall, and this is exactly what the stud finder finds out. It signals the sound or the indicator blinks when it detects that the pin is located behind the device. It informs you about the location of the beam so that you can make a note with a pen or knife.
They check density changes to find a “pin”.
When Should You Use a Stud Finder?
All stud finders perform the same function: search and detect pins and beams in the walls. Let’s answer this question and compare different stud finders.
How to find ceiling studs?
For example, you settled a Tv into a new apartment. Now you need to find a stud to start the entire installation process. How does the whole search process happen? Let’s try to find it out.
Whenever you search for something, it helps if you have at least some information about the subject you are looking for. However, the process of searching for the pin is completely different. The pin is a piece of lumber, which is the base, part of the wall framing. It is hidden behind a layer of drywall or plaster, these pins are placed inside the wall uniformly, and, as a rule, they are separated from each other. It should be noted that horizontal boards form a frame in your ceiling, they are set at intervals of 16 inches or 24 inches.
How to use a stud finder?
The spider rod searches with a help of capacitor plate. This allows us to see changes in the electrostatic field, in this case, the difference in the density between the drywall and denser wood (Stud).
This helps accurately determine where the edge of the wood is located, exactly where the density suddenly changes.
Magnetic spy machines quickly and accurately find pins and beams, detecting them in the wall. You just put the detector over the desired search area and you have to wait until it clicks on or flashing lights that let you know about the completed search, as well as to signal the presence of a pin.
Electronic devices use sensors to detect changes in the wall space. They need calibration, and what does it mean? And it means that you have to start your search by holding the detector in space, in the place where you know that there are no studs or beams. When the device is calibrated, slowly move it along the wall or ceiling where you need to find the pinch area. The detector will give a beep when it passes through a spire or beams.
How to find studs in plaster walls?
The most drywall and plaster are not strong enough to support the ceiling that loads it, finding the studs or ceiling strips is the very first step to securely attach any items to the wall or ceiling. There are many ways to implement a pinsetter. You can choose the one that suits you best and most of all you like for installation.
Does Stud Finder APP work?
Stud-Detector applications make it easy to find metal frame screws, studs or nails in the walls. Easy to use programs will help you harness the picture in your home, hang the design on the wall of the TV, as well as any other designs that require software support. Be sure to read the quick reference section available from the question mark icon in the program for more detailed instructions on how to use effectively the studio detector.
Why Are False Positives or Inaccurate Readings So Common?
Although many modern detectors are accurate but are there false results sometimes?
An invalid negative is the result of a search that indicates that the detector did not find the desired object. The results of the false negative test can be negatively reflected in the search.
Accordingly, the false-positive test result indicates that a person has a specific disease or condition when a person does not have it. An example of a positive search is that a specific search, designed to detect a pin, gives a positive result.
Since the search on each surface is different, the causes of the wrong result and the speed at which the search is performed depends on the detector and the surface of the further observation in which objects are used and searched.
Tips and tricks for using stud finders
There are some simple tricks that you can use to save time and nerves while using stud finders.
First, make sure the search appliance is charged before you start working. The last thing you want to hear about is the waiting time when the search appliance is charged before you can start working.
Starting a search for a pin from the window or door to make the search structure more secure. Start looking there!
Secondly, be patient: the search for a spike can take some time, but it should not take more than 10-15 minutes with the help of a good spider seeker, so while choosing stud finders, you need to come up with a balanced and pre-thoughtful choice.
All these pieces of advice help you determine clearly if you really need a stud finder, whether the purchase is feasible, or whether it will benefit you.
What do we want to say at the end
Well, if you read this part, you definitely have enough of patients to read the whole article. Congratulations it’s your lucky ticket! Our conclusion will dispel all your doubts! Everything is simple.
If you use this stud finder for the very first time so you definitely need to choose Franklin Sensors ProSensor 710 — the best overall stud finder in 2018. For a newbie, in such area, it will be a perfect solution. Designed with the professional contractor in mind, the 710 is our most accurate and deepest sensing stud finder. It has a max detection depth of 1.7” while still being tough enough to withstand being dropped off your ladder or tossed into the back of your truck. The 7” extra-wide LED display not only shows you the center and edge of studs, it can also save your time and read the width of multiple studs that you’ll find around windows and doors.
Though if you are experienced stud finder user but want a new one, definitely choose DEWALT DCT419S1 — the best premium choice for a homeowner. Although there are a lot of stud sensors on the market, the DEWALT 12-Volt Handheld Wall Scanner lets you find more. Using proprietary sensing technology, this scanner can locate and map up to 5 kinds of embedded materials wood, ferrous metal, non-ferrous metal, plastic and unshielded live electric! And it can penetrate multiple types of wall surfaces as deep as 3 in! Who needs x-ray vision? Get the 12-Volt Handheld Wall Scanner instead.
If you work only with a plastic surface and don’t want to pay more money for some “benefits”, choose Bosch GMS120 — the best stud finder for the plastic surface. Reliable universal detector Bosch GMS 120 with three modes of operation quickly and accurately detect objects, the contents of non-ferrous and ferrous metals, electrical wiring, wooden beams. The depth of the definition of steel is 120 mm, copper – 80 mm, wiring -50 mm, wood – 38 mm. Precise definition of the center of the object and the properties of the material. The automatic shutdown of the device is triggered after 5 minutes of inactivity. Powered by a 9V 6LR61 battery. The metal detector comes with a battery, a case and a loop on the arm.
If you work with a metallic surface and you cannot decide which one is better for such type of work, choose MetalliScanner M40 — the best stud finder for metals surface. MetalliScanner m40 solves complex problems of finding structures in plastered walls by identifying nails, the wooden cover is attached with. And this is only the beginning! Thanks to patentable and accurate scanning capabilities, the metal scanner is convenient and easy to use. Controlling the device with a single button makes the scanner indispensable for both experienced professionals and for those who prefer to do the work themselves.M40 quickly and easily detects ferrous metals with a depth of occurrence up to 102 mm and non-ferrous metals at a depth of up to 51 mm. The scanner locates a water pipe, pipeline, reinforcing steel, nails, and bolts in a non-metallic surface, such as a drywall wall, planking, tile, plaster, gypsum and concrete. The M40 scanner will help you find the buried metal in the lumber.
If you are looking for best magnetic stud finder choose CH Hanson 03040 — the best magnetic stud finder. CH Hanson 03040 Magnetic Stud Finder Click Thumbnails to Enlarge Positively locates nails and screws with powerful “neodymium” magnets. The magnetic stud finder works like magic. It sticks to the wall leaving your hands free — no batteries, no calibration, no lights, no hassle. It works on wood or metal studs and uses multiple industrial strength magnets to “Field Vector” the stud. This is the last stud finder you will ever buy. Simply slide the flat surface of the magnetic stud finder, slowly across a wall, in a circular or “S” motion until you feel a strong pull to a nail head or screw. Once you have the magnetic stud finder directly above a nail head or screw, let it go and stick to the wall.
If you want buy the best stud finder and never regret about such purchase, definitely choose — Zircon StudSensor e50-FFP — the best stud finder for its money. Zircon has wrapped up their proven, patented technology into a revolutionary new form. The e50’s new body design can be held comfortably in either hand at any angle and reduces normal scanning errors. The rubber over-molded grip also gives you a secure hold. In addition to a new shape and updated components, the sensor E50 offers several additional features to make finding studs and joists easy.